About this project
A compact ring and jewelry stand: a rounded catch-all dish for earrings and small pieces, with two stepped round pedestals, each topped by a tapered ring post.
How it's built
- Dish - a round-cornered box with a matching recess cut from it, leaving a solid floor and a thin rim.
- Tiers - two round pedestals side by side; the second stands one step taller than the first.
- Ring posts - each pedestal carries a tapered post that narrows to 55% of its base diameter. The short post is 75% of the tall one's height, so rings of different sizes sit at different levels.
Parameters
| Group | Control | What it does |
|---|---|---|
| Size | Length, depth | 130-200 × 85-125 mm footprint |
| Dish | Floor, wall, depth | Floor thickness, rim width and recess depth |
| Tiers | Diameter, spacing, step | Pedestal size, centre-to-centre distance and the height difference between the two tiers |
| Ring posts | Height, diameter | Tall post 25-55 mm (the short one follows at 75%); base diameter 10-18 mm |
| Resolution | Mesh quality | Draft / Standard / Fine |
Printing
Print upright as one piece. Every feature is straight or narrows going up, so no supports are needed.
UpdatedNov 2, 2026
Version5
Likes0
Downloads0