About this project
A shallow flared bowl with a scalloped rim and a raised pattern wrapped around its sides. Choose from six relief styles - ripple rings, contour bands, a single halo ridge, smooth domes, or rounded or concave medallions - and optionally add wavy sides.
How it's built
- Bowl - a revolved section with a flat foot and a rounded lip. The wall offset is corrected for the flare, so the wall keeps its set thickness along the slope.
- Rim - a warp adds a vertical wave to the rim that fades out towards the floor, so the base stays flat.
- Relief - a heightmap warp wraps a live distance-field pattern, generated from an editable ellipse, around the sides a whole number of times. It moves both wall faces together, so the relief never thins the wall.
Parameters
| Group | Control | What it does |
|---|---|---|
| Bowl size | Diameter, height, foot ratio | 60-170 mm across, 22-60 mm tall before the scallops, flat foot 0.62-0.76 of the diameter |
| Print structure | Wall, base | Wall and floor thickness |
| Scalloped rim | Amplitude, waves | 0-3 mm (0 gives a level rim), 4-12 waves |
| Wrapped heightmap | Style | Six relief patterns |
| Wrapped heightmap | Depth, spacing, repeats | 0-3 mm relief (0 is plain), contour spacing, 2-6 repeats around the bowl |
| Wavy sides | Depth, count | 0-4 mm in-and-out lobes (0 keeps it round), 3-12 lobes |
| Resolution | Model resolution | Draft / Standard / Fine; re-export after changing |
Printing
Print upright on the flat foot. Use Fine resolution for the final export.
UpdatedNov 2, 2026
Version5
Likes0
Downloads0